show ethernet cfm statistics
Display MEP statistics.
S4810
Syntax
show ethernet cfm statistics [domain {name | level} vlan-id
vlan-id mpid mpid]
Parameters
domain Enter the keyword domain to display statistics for a particular
domain.
name | level Enter the domain name or level.
vlan-id vlan-id Enter the keyword vlan-id then a VLAN ID.
mpid mpid Enter the keyword mpid then a maintenance point ID.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
Dell# show ethernet cfm statistics
Domain Name: Customer
Domain Level: 7
MA Name: My_MA
MPID: 300
CCMs:
Transmitted: 1503 RcvdSeqErrors: 0
LTRs:
Unexpected Rcvd: 0
LBRs:
Received: 0 Rcvd Out Of Order: 0
Received Bad MSDU: 0
Transmitted: 0
802.1ag
177
To Next Page
Loading...
