EasyManua.ls Logo

Dell S4810 - Page 154

Dell S4810
1761 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Example (S-
Series)
Dell#show tech-support stack-unit 0
----------------------------------- show version
-------------------------------
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 9-4(0-168)
Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved.
Build Time: Sun Mar 23 22:17:49 PDT 2014
Build Path: /work.local/build/buildSpaces/build01/E9-4-0/SW/SRC
Dell Networking OS uptime is 32 minute(s)
System image file is "s6000"
System Type: S6000
Control Processor: Intel Centerton with 3203911680 bytes of
memory, core(s) 2.
16G bytes of boot flash memory.
1 32-port TE/FG (SI)
64 Ten GigabitEthernet/IEEE 802.3 interface(s)
16 Forty GigabitEthernet/IEEE 802.3 interface(s)
------------------------------------ show clock
-------------------------------
18:10:52.864 UTC Tue Mar 25 2014
----------------------------------- show running-config
------------------------
Current Configuration ...
! Version 9-4(0-168)
! Last configuration change at Tue Mar 25 17:43:06 2014 by
admin
!
boot system stack-unit 0 primary tftp://10.16.127.146/s6000
boot system stack-unit 0 secondary system: B:
boot system stack-unit 0 default system: A:
!
redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 3
redundancy disable-auto-reboot stack-unit 4
redundancy disable-auto-reboot stack-unit 5
!
hardware watchdog stack-unit 0
hardware watchdog stack-unit 1
hardware watchdog stack-unit 2
hardware watchdog stack-unit 3
hardware watchdog stack-unit 4
hardware watchdog stack-unit 5
!
Related
Commands
show version — displays the Dell Networking OS version.
show system (S-Series and Z-Series) — displays the current switch status.
show environment (S-Series) — displays the system component status.
154
Control and Monitoring

Table of Contents

Other manuals for Dell S4810

Related product manuals