Dell S4810 - Page 1611

Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.7.1.0 Introduced on the S-Series.
Usage
Information
The following describes the show interfaces command shown in the following
example.
Field Description
Topology Lists the topology of stack ports connected: Ring, Daisy
chain, or Standalone.
Interface The unit/port ID of the connected stack port on this unit.
Link Speed Link Speed of the stack port (10 or 40) in Gb/s.
Admin Status The only currently listed status is Up.
Connection The stack port ID to which this unit’s stack port is
connected.
Example
Dell# show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link
(Gb/s) Status Status
--------------------------------------------------
0/49 1/49 12 up up
0/50 12 up down
0/51 2/49 24 up up
1/49 0/49 12 up up
1/50 2/51 12 up up
2/49 0/51 24 up up
2/51 1/50 12 up up
2/52 12 up down
Dell#
Example
(Status)
Dell# show system stack-ports status
Topology: Ring
Interface Link Speed Admin Link
(Gb/s) Status Status
----------------------------------------
0/49 12 up up
0/50 12 up down
0/51 24 up up
1/49 12 up up
1/50 12 up up
2/49 24 up up
2/51 12 up up
2/52 12 up down
Dell#
Example
(Topology)
Dell# show system stack-ports topology
Topology: Ring
Interface Connection
Stacking
1611