Dell S4810 - Page 202

Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.4.2.1 Added the mac-address option on the C-Series and S-
Series.
Version 7.6.1.0 Introduced on the C-Series, E-Series, and S-Series.
Usage
Information
If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X
configuration details (Port Authentication status, Untagged VLAN ID, Authentication
PAE state, and Backend state) are displayed for each supplicant, as shown in the
following example.
Example
Dell#show dot1x int Gi 2/32
802.1x information on Gi 2/32:
-----------------------------
Dot1x Status: Enable
Port Control: AUTO
Port Auth Status: UNAUTHORIZED
Re-Authentication: Disable
Untagged VLAN id: None
Guest VLAN: Enable
Guest VLAN id: 10
Auth-Fail VLAN: Enable
Auth-Fail VLAN id: 11
Auth-Fail Max-Attempts: 3
Tx Period: 30 seconds
Quiet Period: 60 seconds
ReAuth Max: 2
Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
Re-Auth Interval: 3600 seconds
Max-EAP-Req: 2
Auth Type: SINGLE_HOST
Auth PAE State: Initialize
Backend State: Initialize
Dell#
Example (mac-
address)
Dell#show dot1x interface gig 2/21 mac-address
00:00:01:00:07:00
802.1x information on Gi 2/21:
-----------------------------
Dot1x Status: Enable
Port Control: AUTO
Re-Authentication: Disable
Guest VLAN: Disable
Guest VLAN id: NONE
Auth-Fail VLAN: Disable
Auth-Fail VLAN id: NONE
Auth-Fail Max-Attempts: NONE
Mac-Auth-Bypass: Enable
Mac-Auth-Bypass Only: Disable
Tx Period: 5 seconds
202
802.1X