Dell S4810 - Page 589

UCAST 11 0
MCAST 0 0
MCAST 1 0
MCAST 2 0
MCAST 3 0
MCAST 4 0
MCAST 5 0
MCAST 6 0
MCAST 7 0
MCAST 8 0
<… snip …>
Stack-unit: 0 unit: 0 port: 104 (interface Te 0/124)
---------------------------------------
PG# SHARED CELLS HEADROOM CELLS
---------------------------------------
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
UCAST 0 0
UCAST 1 0
UCAST 2 0
UCAST 3 0
UCAST 4 0
UCAST 5 0
UCAST 6 0
UCAST 7 0
UCAST 8 0
UCAST 9 0
UCAST 10 0
UCAST 11 1
MCAST 0 0
MCAST 1 0
MCAST 2 0
MCAST 3 0
MCAST 4 0
MCAST 5 0
MCAST 6 0
MCAST 7 0
MCAST 8 0
To determine the port that is congested and monitor all queues (including
multicast and unicast queues] only on that port:
Dell#$show hardware stack-unit 0 buffer-stats-snapshot unit 0
resource port 1 queue all
Stack-unit: 0 unit: 0 port: 1 (interface Fo 0/0)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
UCAST 0 0
UCAST 1 0
UCAST 2 0
UCAST 3 0
UCAST 4 0
Data Center Bridging (DCB)
589