Dasan V5808 - Page 107

User Manual UMN:CLI
V5808
107
Setting a mirror for VLAN allows you to monitor all traffic to the specified VLAN interface.
To designate the mirrored VLAN ID, use the following command.
Command
Mode
Description
mirror add vlan VLANS
Bridge
Designates the mirrored VLAN.
VLANS: VLAN ID
The V5808 supports the VLAN mirroring function for the ingress traffic only.
Step 3 Activate the port mirroring, using the following command.
Command
Mode
Description
mirror enable
Bridge
Activates port mirroring.
Step 4 To display a configured port mirroring, use the following command.
Command
Mode
Description
show mirror
Enable
Global
Bridge
Shows a configured port mirroring.
To delete and modify the configuration, use the following command.
Command
Mode
Description
mirror disable
Bridge
Deactivates monitoring.
mirror del PORTS [ingress |
egress]
Deletes a port from the mirrored ports.
mirror del vlan VLANS
Deletes the VLAN from the mirrored VLANs.
To disable monitoring function, use the following command.
Command
Mode
Description
no mirror monitor
Bridge
Disables port mirroring function.
The following is an example of enabling the port mirroring on the port 11 and 12 with the
monitoring port 9.
SWITCH(bridge)# mirror enable
SWITCH(bridge)# mirror monitor 9
SWITCH(bridge)# mirror add 11
SWITCH(bridge)# mirror add 12
SWITCH(bridge)# show mirror
Mirroring enabled
Monitor port = 9
- Mirrored Ports
-----------------------------------------
!