Dasan V5808 - Assigning Link Local Address to Network Interface

UMN:CLI User Manual
V5808
84
Command
Mode
Description
ipv6 address PREFIX X:X::X:X/M
Interface
Configures IPv6 address which is dynamically
changeable according to the prefix name.
PREFIX: prefix name
X:X::X:X/M : IPv6 prefix of sub host.
no ipv6 address PREFIX
X:X::X:X/M
Disables a dynamic IPv6 address allocation using the
prefix name and sub-host address.
4.4.3 Assigning Link Local Address to Network Interface
The link-lcal address used between directly connected nodes on a single network link. To
assign an IPv6 link-local address to a network interface, use the following command.
Command
Mode
Description
ipv6 address link-local X:X::X:X
Interface
Assigns a link-local address on the interface.
X:X::X:X: IPv6 address using MAC address according
to its EUI-64 format
To disable an assigned IPv6 link-local address, use the following command.
Command
Mode
Description
no ipv6 address link-local
Interface
Clears a link-local address assigned to an interface.
To display an assigned link-local address, use the following command.
Command
Mode
Description
show ipv6 interface [IN-
TERFACE] brief
Enable
Global
Bridge
Shows a link-local address assigned to an interface.
4.4.4 Static Route and Default Gateway
The static route is a predefined route to a specific network and/or device such as a host.