User Manual UMN:CLI
V5808
173
syslog local volatile size <1-
128>
Configures the volatile size of syslog message.
volatile: removes the syslog messages after restart.
1-128: buffer size to save (kbytes)
Removes the local volatile size.
To display the received syslog message in the system memory, use the following
command.
show syslog local {volatile |
non-volatile} [NUMBER]
Shows the received syslog messages.
volatile: removes the syslog messages after restart.
non-volatile: reserves the syslog messages.
NUMBER: shows the last N syslog messages.
show syslog local {volatile |
non-volatile} reverse
Shows the received syslog messages in the reverse
order.
clear syslog local {volatile | non-
volatile}
Removes the received syslog messages.
7.4.7 Displaying Syslog Status
To display the saved syslog status, use the following command.
Shows the configuration of the syslog.
show syslog {volatile | non-
volatile} information
Shows the usage of the area where the received
syslog messages are stored.
volatile: the area for volatile syslog messages
non-volatile: the area for non-volatile syslog messages
To Next Page
Loading...