Dasan V5808 - Deleting Dhcpv6 Option Format; Displaying Dhcpv6 Option; Debugging Dhcpv6

User Manual UMN:CLI
V5808
375
%FIRMWARE-VERSION: firmware version
%PORT-NUM: input port number
%IN_IF_IPv6: input interface IPv6 address
%ONT-SERIAL: ONT serial number
8.6.4.3 Deleting DHCPv6 Option Format
To delete a specified DHCPv6 option format, use the following command.
Command
Mode
Description
no ipv6 dhcp option format
NAME
Global
Deletes the given DHCPv6 option format.
8.6.4.4 Displaying DHCPv6 option
To print a specified DHCPv6 option format, use the following command.
Command
Mode
Description
show ipv6 dhcp option format
NAME
Enable
Global
DHCPv6
Option
Shows the information of a given DHCPv6 option
format.
8.6.5 Debugging DHCPv6
To enable/disable a DHCPv6 debugging, use the following command.
Command
Mode
Description
debug ipv6 dhcp [detail]
Enable
Enables DHCPv6 debugging.
no debug ipv6 dhcp [detail]
Disables DHCPv6 debugging.
To display the debugging information, use the following command.
Command
Mode
Description
show debugging ipv6 dhcp
Enable
Global
Bridge
Shows the debugging information of DHCP.