Dasan V5808 - Displaying SNMP Alarm; SNMP Message Logging

User Manual UMN:CLI
V5808
155
no snmp alarm-severity rmon-alarm-falling
no snmp alarm-severity system-restart
7.1.13.5 Displaying SNMP Alarm
To display a collected alarm, use the following command.
Command
Mode
Description
show snmp alarm-severity
Enable
Global
Bridge
Shows a configured alarm severity.
show snmp alarm-history
Shows a collected alarm history.
show snmp alarm-report
Shows a collected alarm report.
To deletes a collected alarm in the system, use the following command.
Command
Mode
Description
snmp clear alarm-history
Global
Deletes a collected alarm history in the system.
snmp clear alarm-report
Deletes a collected alarm report in the system.
7.1.14 SNMP Message Logging
SNMP message logs are useful to the system administrator for troubleshooting problems
in the network. To enable/disable SNMP message logging to the non-volatile memory, use
the following command.
Command
Mode
Description
snmp log non-volatile
Global
Enables saving the SNMP message logs to non-
volatile memory
no snmp log non-volatile
Disables saving the SNMP message logs to non-
volatile memory
To remove all stored SNMP message logs from the non-volatile memory, use the
following command.
Command
Mode
Description
clear snmp log non-volatile
Global
Clears all the SNMP logs in non-volatile memory
To display the SNMP message logs in the non-volatile memory, use the following
command.
Command
Mode
Description
show snmp log
Enable
Global
Shows the recorded SNMP message logs.
show snmp log non-volatile
Shows the recorded SNMP message logs in the non-