Dasan V5808 - DHCP Class Capability; DHCP Class Creation; Relay Agent Information Pattern

User Manual UMN:CLI
V5808
333
8.5.2.1 DHCP Class Capability
To enable the DHCP server to use a DHCP class to assign IP addresses, use the
following command.
Command
Mode
Description
ip dhcp use class
Global
Enables the DHCP server to use a DHCP class to
assign IP addresses.
no ip dhcp use class
Disables the DHCP server to use a DHCP class.
8.5.2.2 DHCP Class Creation
To create a DHCP class, use the following command.
Command
Mode
Description
ip dhcp class CLASS
Global
Creates a DHCP class and opens DHCP Class
Configuration mode.
CLASS: DHCP class name
no ip dhcp class [CLASS]
Deletes a created DHCP class.
8.5.2.3 Relay Agent Information Pattern
To specify option 82 information for IP assignment, use the following command.
Command
Mode
Description
relay-information remote-id ip A.B.C.D [circuit-
id {hex HEXSTRING | index <0-65535> | text
STRING}]
DHCP
Class
Specifies option 82 information for IP
assignment.
relay-information remote-id hex HEXSTRING
[circuit-id {hex HEXSTRING | index <0-65535> |
text STRING}]
relay-information remote-id text STRING
[circuit-id {hex HEXSTRING | index <0-65535> |
text STRING}]
To delete specified option 82 information for IP assignment, use the following command.
Command
Mode
Description
no relay-information remote-id ip A.B.C.D
[circuit-id {hex HEXSTRING | index <0-65535> |
text STRING}]
DHCP
Class
Deletes specified option 82 information
for IP assignment.
no relay-information remote-id hex
HEXSTRING [circuit-id {hex HEXSTRING |
index <0-65535> | text STRING}]
no relay-information remote-id text STRING
[circuit-id {hex HEXSTRING | index <0-65535> |
text STRING}]