UMN:CLI User Manual
V5808
692
12.2.26.3 Traffic Profile Configuration (Step2)
The following command lines show a sample config of traffic profile corresponding to the
sample scheme. You can find out which configurations are required for ONT's VoIP and
data service through each annotation.
OLT(gpon)# show running-config traffic-profile TRAFFIC
traffic-profile TRAFFIC create
mgmt-mode uni eth 1 non-omci link virtual-eth 1
mgmt-mode uni eth 2 omci
mgmt-mode uni eth 3 omci
mgmt-mode uni eth 4 omci
tcont 1
gemport 1/1-1/4
dba-profile BE
tcont 2
gemport 2/1-2/4
dba-profile BE
tcont 3
gemport 3/1
dba-profile VOIP
mapper 1
gemport count 4
mapper 2
gemport count 4
mapper 3
gemport count 1
bridge 1
ani mapper 1
uni eth 1
extended-vlan-tagging-operation V200
bridge 2
ani mapper 2
uni eth 2
multicast-profile V501
extended-vlan-tagging-operation V501
uni eth 3
multicast-profile V501
extended-vlan-tagging-operation V501
uni eth 4
multicast-profile V501
extended-vlan-tagging-operation V501
bridge 3
ani mapper 3
link ip-host-config 1
ip-host-config 1
ip address static