UMN:CLI User Manual
V5808
664
show onu ani optic-module-info
OLT-ID ONU-ID [test-action]
Enable
Global
GPON
GPON-OLT
Shows the operating parameters of the GPON module,
including the optical characteristics.
show onu ani optic-module-info
ONU_ID
show onu uni optic-module-info
OLT-ID ONU-ID PORT
Shows the operating parameters of the module of UNI
port including the optical characteristics.
show onu uni optic-module-info
ONU-ID PORT
To use the above command, ONU (ONT) should support DDMI feature and provide
diagnostic information about the module’s present operating conditions to OLT.
12.2.17 ONU System Account
To add system-account information for ONUs, use the following command.
onu system-account ONU-ID
USER [PASSWD]
Creates the login account ID and password for ONU
ID.
ONU-ID: ONU ID (1 to128) or ONU serial number
USER: user name
PASSWD: password
To display the system-account information of ONU ID, use the following command.
show onu system-account
OLT-ID ONU-ID
Shows the system-account information of ONU.
show onu system-account
ONU-ID
12.2.18 ONU CoS Remarking
To configure CoS remarking feature based on the specific MAC/IP for ONU, use the
following command.
onu cos-remarking ONU_ID
{src-mac | dst-mac}
XX:XX:XX:XX:XX:XX
Configures CoS remarking for ONU ID.
ONU-ID: ONU ID (1 to 128) or ONU serial
number