Dasan V5808 - BGP Debug; BGP Monitoring and Management; Displaying BGP Information

User Manual UMN:CLI
V5808
537
clear ip prefix-list WORD
A.B.C.D/M
Global
prefix with a specified name and prefix.
11.1.13 BGP Debug
To enable BGP debugging, use the following command.
Command
Mode
Description
debug bgp
Enable
Enables BGP debugging.
debug bgp { all | dampening |
events | filters | fsm | keepalives
| nsm | updates [in | out] }
Enables BGP debugging.
all: all BGP debugging
dampening: BGP dampening debugging
events: events debugging
filters: BGP filters debugging
fsm: BGP finite state machine debugging
keepalives: BGP deepalives debugging
nsm: NSM message debugging
updates in/out: inbound/outbound updates debugging
To disable BGP debugging, use the following command.
Command
Mode
Description
no debug bgp
Enable
Disables BGP debugging.
no debug bgp { all | dampening |
events | filters | fsm | keepalives
| nsm | updates }
To display the debugging information, use the following command.
Command
Mode
Description
show debugging bgp
Enable
Global
Bridge
Shows the debugging information of BGP.
11.1.14 BGP Monitoring and Management
11.1.14.1 Displaying BGP Information
BGP network information or configurations provided can be used to determine resource
utilization and enable BGP troubleshooting functions to solve network problems.
To see the configurations involved in BGP routing protocol, use the following command.