Dasan V5808 - SNMP Agent Administrator

User Manual UMN:CLI
V5808
141
Command
Mode
Description
show snmp community
Enable
Global
Bridge
Shows created SNMP community.
The following is an example of creating 2 SNMP communities.
SWITCH(config)# snmp community ro public
SWITCH(config)# snmp community rw private
SWITCH(config)# show snmp community
Community List
Type Community Source OID
-----------------------------------------------
ro public
rw private
SWITCH(config)#
7.1.3 SNMP Agent Administrator
You can specify the basic information of SNMP agent as administrator, location, and
address that confirm its own identity.
To set the basic information of the SNMP agent, use the following command.
Command
Mode
Description
snmp contact NAME
Global
Sets the name of the administrator.
snmp location LOCATION
Sets the location of the SNMP agent.
no snmp contact
Deletes the specified basic information for each item.
no snmp location
The following is an example of specifying basic information of SNMP agent.
SWITCH(config)# snmp contact dasan<02.3484.6500>
SWITCH(config)# show snmp contact
contact dasan<02.3484.6500>
SWITCH(config)# snmp location Seoul,Korea
SWITCH(config)# show snmp location
location Seoul,Korea
SWITCH(config)#
To display the basic information of the SNMP agent, use the following command.
Command
Mode
Description
show snmp contact
Enable
Global
Shows the name of the administrator.
show snmp location
Shows the location of the SNMP agent.