Dasan V5808 - To Enable;Disable the Jumbo Frame Capacity; To Display the Configuration of Jumbo Frame

UMN:CLI User Manual
V5808
394
jumbo frame larger than 1518 bytes through user’s configuration.
To enable/disable the jumbo frame capacity, use the following command.
Command
Mode
Description
jumbo-frame PORTS <1518-
12288>
Bridge
Configures to accept jumbo frame between specified
ranges. (default: 1518)
no jumbo-frame PORTS
Disables configuration to accept jumbo frame on
specified port.
To display the configuration of jumbo frame, use the following command.
Command
Mode
Description
show jumbo-frame
Enable
Global
Bridge
Shows a configuration of jumbo frame.