Dasan V5808 - The Command Execution Limit

User Manual UMN:CLI
V5808
55
end
Exits to Privileged EXEC Enable mode.
If you use the exit command in Privileged EXEC Enable mode or Privileged EXEC View
mode, you will be logged out!
3.3.6 The Command Execution Limit
If you try to have more than ‘1000’ processes executed by a command, you meet a limit
block with “Too many to process” error message by system policy as follows:
SWITCH(bridge)# vlan add 3-4090 1-24 tagged
% Too many to process(user-input/maximum:98112/1000)
SWITCH(bridge)#
By using command above, it creates 4088 VLANs, and registers each created VLAN to
individual ports from 1 to 24 with tagged option repeatedly. It indicates that you try to run
98112 (4088 x 24) actions in the system. The system processes individually the values
within a specified range.
!