UMN:CLI User Manual
V5808
752
12.7 VoIP Profile
12.7.1 OMCI Management Configuration
The GPON system enables multi-vendor interoperability between OLT and ONT. The
OMCI specification addresses the ONT configuration management, fault management
and performance management for GPON system operation and for several services
including voice services. The OMCI and the configuration server based architecture are
the standard alternatives to convey the operation of the ONT for VoIP. In addition, the
VoIP user agent at the ONT needs to work in conjunction with a softswitch for voice
service features.
You need to open VoIP Profile Configuration mode to configure VoIP based on OMCI
management. To implement the configurations of VoIP between OLT and ONU, an ONU
profile should be included by the configured VoIP profile. You can easily manage the VoIP
network parameters of ONUs using the VoIP profile.
The ONT must be applied by VoIP profile defined in if the ONT has POTS terminations
and if OLT is to be used to remotely manage and provide the VoIP service.
12.7.1.1 Creating VoIP Profile
To create a VoIP profile, use the following command.
Creates a VoIP profile.
NAME: VoIP profile name
After opening VoIP Profile Configuration mode, the prompt changes from
SWITCH(gpon)# to SWITCH(config-voip-profile[NAME])#.
To delete an existing VoIP profile, use the following command.
Deletes n VoIP profile.
NAME: VoIP profile name
To modify an existing VoIP profile, use the following command.
Modifies the exisitng VoIP profile.
NAME: VoIP profile name
To Next Page
Loading...
Need help?
General