Dasan V5808 - VRRP Debug; To Enable VRRP Debugging; To Disable VRRP Debugging

UMN:CLI User Manual
V5808
384
8.7.2.3 VRRP Debug
To enable VRRP debugging, use the following command.
Command
Mode
Description
debug vrrp [all]
Enable
Enables VRRP debugging.
all: all VRRP debugging
debug vrrp nsm [interface | bfd]
Enables VRRP debugging.
nsm: NSM notifications debugging
interface: interface information
bfd: BFD detection
debug vrrp packet [send | recv |
detail]
Enables VRRPv2 packets debugging.
packet: VRRPv2 packets
send: outgoing packets
recv: incoming packets
detail: detail information
debug vrrp sm [events | status |
timers]
Enables VRRP state machine debugging.
sm: state machine
events: SM events
status: SM status
timers: SM timers
To disable VRRP debugging, use the following command.
Command
Mode
Description
no debug vrrp [all]
Enable
Disables VRRP debugging.
no debug vrrp nsm [interface | bfd]
no debug vrrp packet [send | recv | detail]
no debug vrrp sm [events | status | timers]
To display the debugging information, use the following command.
Command
Mode
Description
show debugging vrrp
Enable
Global
VRRP
Shows the debugging information of VRRP.