Dasan V5808 - Opaque-LSA Support; Default Route

User Manual UMN:CLI
V5808
559
Command
Mode
Description
ospf restart grace-period <1-1800>
Global
Configures the additional options for
Graceful Restart.
ospf restart helper max-grace-period <1-1800>
ospf restart helper max-grace-period <1-1800>
only-reload [only-upgrade]
ospf restart helper max-grace-period <1-1800>
only-upgrade [only-reload]
ospf restart helper only-reload [only-upgrade]
ospf restart helper only-reload only-upgrade
max-grace-period <1-1800>
ospf restart helper only-reload max-grace-
period <1-1800> [only-upgrade]
ospf restart helper only-upgrade [only-reload]
ospf restart helper only-upgrade only-reload
max-grace-period <1-1800>
ospf restart helper only-upgrade max-grace-
period <1-1800> [only-reload]
To release the configuration, use the following command.
Command
Mode
Description
no ospf restart grace-period <1-1800>
Global
Releases the configuration.
ospf restart helper never
no ospf restart helper max-grace-period <1-
1800>
11.2.9 Opaque-LSA Support
Opaque-LSA is LSA Type-9, Type-10, Type-11. The V5808 enables Opaque-LSA as a
default but it can be released by user.
To release the enabled Opaque-LSA management, use the following command.
Command
Mode
Description
no capability opaque
Router
Releases the enabled Opaque-LSA management.
To enable Opaque-LSA management, use the following command.
Command
Mode
Description
capability opaque
Router
Enables Opaque-LSA management.
11.2.10 Default Route
You can configure ASBR (Autonomous System Boundary Router) to transmit default