UMN:CLI User Manual
V5808
676
12.2.24 ONU Firmware Upgrade
The provides the remote ONU (ONT) upgradeability. This feature allows the system
administrators not to offer the local service for a single ONU (ONT) upgrade at the
customer premise. To upgrade an ONU (ONT) successfully, you need to download a new
ONU (ONT) firmware in the system.
12.2.24.1 Manual Upgrade (1)
(1) Downloading Firmware to OLT
To download ONU (ONT) firmware in the system, use the following command.
copy {ftp | tftp} onu download
[vrf VRFNAME]
Downloads ONU firmware via FTP or TFTP.
The following is an example of downloading ONU (ONT) firmware in the system.
SWITCH# copy ftp onu download
To exit : press Ctrl+D
--------------------------------------
IP address or name of remote host (FTP): xxx.xxx.xxx.xxx
Download File Name : XXXXXX.x
User Name : user
Password:
To remove the downloaded ONU (ONT) firmware in OLT, use the following command.
remove onu firmware FILE-
NAME
Removes the downloaded ONU (ONT) firmware in
OLT.
To display the list of the downloaded ONU (ONT) firmware in OLT, use the following
command.
Enable
Global
GPON
GPON-OLT
Shows the downloaded ONU (ONT) firmware list in
OLT.