Dasan V5808 - Maximum Frame Size; Mapping between Multicast Profile and UNI Port; IGMP Group

User Manual UMN:CLI
V5808
721
Command
Mode
Description
rate-limit profile NAME
Traffic
Bridge-UNI
Applies the configured Rate-limit profile to specified
UNI port.
NAME: Rate-limit profile name
no rate-limit profile
Removes the Rate-limit profile from connected UNI
port.
For the details of how to create and configure the Rate-limit profile, see 12.12 Rate-limit
Profile.
To configure the rate limit for the multicast traffic, use the following command.
Command
Mode
Description
multicast rate-limit <0-1031616>
Traffic
Bridge-UNI
Sets the maximum bandwidth of multicast traffic.
0-1031616: maximum bandwidth (in steps of 8kbps, 0 is
disable)
Maximum Frame Size
To specify the maximum frame size to be handled by an UNI-side port, use the following
command.
Command
Mode
Description
max-frame <64-2036>
Traffic
Bridge-UNI
Sets the maximum frame size for an UNI port.
no max-frame
Deletes the configured maximum frame size.
Mapping between Multicast Profile and UNI port
To apply the configured multicast profile to a specified UNI-side port, use the following
command.
Command
Mode
Description
multicast-profile PROFILE
Traffic
Bridge-UNI
Applies the existing multicast profile to a specified UNI
port.
PROFILE: Multicast profile name
no multicast-profile
Deletes the mapping between a multicast profile and
this UNI port.
IGMP Group
To specify the maximum number of IGMP groups, which are correspond to IGMP join
message from the UNI-side port, use the following command.
Command
Mode
Description
igmp max-group <0-255>
Traffic
Bridge-UNI
Sets the maximum number of IGMP groups for an UNI
port.
i