Dasan V5808 - Disabling SNMP; Displaying SNMP Configuration

UMN:CLI User Manual
V5808
156
[<1-2000>]
volatile memory.
1-100: SNMP logs line number to be displayed
show snmp log non-volatile tail
<1-2000>
Shows currently recorded SNMP message logs in the
non-volatile memory.
7.1.15 Disabling SNMP
To disable SNMP, use the following command.
Command
Mode
Description
no snmp
Global
Disables SNMP.
no snmp vrf
Disables VPN snmp
When you use the no snmp command, all configurations of SNMP will be lost.
7.1.16 Displaying SNMP Configuration
To display all configurations of SNMP, use the following command.
Command
Mode
Description
show snmp
Enable
Global
Bridge
Shows all configurations of SNMP.
!