Dasan V5808 - Debugging DHCP

User Manual UMN:CLI
V5808
359
To display a status of the DHCP server packet filtering, use the following command.
Command
Mode
Description
show dhcp-server-filter
Enable
Global
Bridge
Show a status of the DHCP server packet filtering.
8.5.11 Debugging DHCP
To enable/disable a DHCP debugging, use the following command.
Command
Mode
Description
debug dhcp {filter | lease |
packet | service | all}
Enable
Enables a DHCP debugging.
no debug dhcp {filter | lease |
packet | service | all}
Disables a DHCP debugging.
To display the debugging information, use the following command.
Command
Mode
Description
show debugging dhcp
Enable
Global
Shows the debugging information of DHCP.