Dasan V5808 - PIM Debug; To Enable PIM-SM Debugging; To Enable PIM-SM Timer Debugging; To Disable PIM-SM Timer Debugging

UMN:CLI User Manual
V5808
460
9.3.3.6 PIM Debug
To enable PIM-SM debugging, use the following command.
Command
Mode
Description
debug pim {all | events | nexthop
| mib | mfc | nsm | state | packet
[in | out]}
Enable
Enables PIM-SM debugging.
all: all PIM-SM debugging
events: events debugging
nexthop: nexthop communications debugging
mib: MIBs debugging
mfc: MFC add/delete/update debugging
nsm: NSM communications debugging
state: debugging of state transition on all FSMs
packet: incoming and/or outgoing packets debugging
no debug pim {all | events |
nexthop | mib | mfc | nsm | state
| packet [in | out]}
Disables PIM-SM debugging.
To enable PIM-SM timer debugging, use the following command.
Command
Mode
Description
debug pim timer
Enable
Enables PIM-SM timer debugging.
debug pim timer assert [at]
Enables PIM-SM assert timer debugging.
debug pim timer bsr [bst | crp]
Enables PIM-SM BSR timer debugging.
bst: bootstrap debugging timer
crp: candidate RP debugging timer
debug pim timer hello [ht | nlt |
tht]
Enables PIM-SM hello timer debugging.
ht: hello timer
nlt: neighbor liveness timer
tht: triggered hello timer
debug pim timer joinprune [jt | et
| ppt | kat | ot]
Enables PIM-SM join/prune timer debugging.
jt: join timer
et: expiry timer
ppt: prune pending timer
kat: keep alive timer
ot: override timer
debug pim timer register [rst]
Enables PIM-SM register timer debugging.
To disable PIM-SM timer debugging, use the following command.
Command
Mode
Description
no debug pim timer
Enable
Disables PIM-SM timer debugging.
no debug pim timer assert [at]
no debug pim timer bsr [bst |
crp]
no debug pim timer hello [ht | nlt
| tht]