Dasan V5808 - Creating Pseudowire Maintenance Profile; Jitter Buffer Maximum Depth

UMN:CLI User Manual
V5808
774
12.9 Pseudowire Maintenance Profile
The pseudowire maintenance profile permits the configuration of pseudowire service
exception handling. The pseudowire maintenance profile primarily affects the alarms
declared by the subscribing pseudowire termination. And also, the settings of a
pseudowire maintenance profile affect the pseudowire performance monitoring history.
12.9.1 Creating Pseudowire Maintenance Profile
To create a pseudowire maintenance profile, use the following command.
Command
Mode
Description
pw-maintenance-profile NAME
create
GPON
Creates a pseudowire maintenance profile.
NAME: pseudowire maintenance profile name
After opening PW Maintenance Profile Configuration mode, the prompt changes from
SWITCH(gpon)# to SWITCH(config-pw-maintenance-profile[NAME])#.
To delete an existing pseudowire maintenance profile, use the following command.
Command
Mode
Description
no pw-maintenance-profile
{NAME | all}
GPON
Deletes the pseudowire maintenance profile.
NAME: pseudowire maintenance profile name
To modify an existing pseudowire maintenance profile, use the following command.
Command
Mode
Description
pw-maintenance-profile NAME
modify
GPON
Modifies the exisitng pseudowire maintenance profile.
NAME: pseudowire maintenance profile name
12.9.2 Jitter Buffer Maximum Depth
To specify the maximum depth of the playout buffer in the PSN to TDM direction, use the
following command.
Command
Mode
Description
jitter-buffer-max-depth VALUE
PW-
Maintenance-
Profile
Specifies the desired maximum depth of the playout
buffer in the PSN to TDM direction.
VALUE: expressed as a multiple of the 125 μs frame
rate
no jitter-buffer-max-depth
Deletes the configured maximum depth of the playout
buffer.