Dasan V5808 - GPON Daemon Memory Usage; GPON Profile Count

UMN:CLI User Manual
V5808
646
Command
Mode
Description
olt add-mac ONU-ID MACADDR
VLAN GEM-PORT
GPON-OLT
Adds the static MAC addresses of ONU.
ONU-ID: ONU ID (1-128) or serial number
GEM-PORT: GEM port ID
To display a MAC address of the ONUs (ONTs) connected to a current OLT, use the
following command.
Command
Mode
Description
show olt mac [ONU-ID]
GPON-OLT
Shows the MAC addresses currently learned on ONU.
ONU-ID: ONU ID (1-128) or serial number
VLANS: VLAN ID
show olt mac ONU-ID [VLANS]
show olt mac count [ONU-IDs]
Shows the number of MAC addresses currently
learned on a specified ONT.
To clear MAC addresses learned on a current OLT, use the following command.
Command
Mode
Description
clear olt mac [ONU-ID]
GPON-OLT
Clears MAC addresses learned on a current OLT.
clear olt mac ONU-ID
[MACADDR VLAN]
Clears MAC addresses of specified ONU (ONT).
MACADDR: MAC address
VLAN: vlan ID
12.1.22.3 GPON Daemon Memory Usage
To display the memory usage of GPON, use the following command.
Command
Mode
Description
show memory gpon
Enable
Global
Bridge
Shows the memory usage of GPON daemon.
12.1.22.4 GPON Profile Count
To display the total number of GPON-based profiles, use the following command.
Command
Mode
Description
show profile count
Enable
Global
GPON
Shows the profile list and the sum of saved GPON-
based profiles.