UMN:CLI User Manual
V5808
532
clear ipv6 bgp external WORD
out
external: clears all external peers.
out: clears outgoing advertised routes.
unicast | multicast : address family modifier
clear ip bgp external {unicast |
multicast} out
clear bgp external soft [in | out]
Updates the route information only while the session is
possible of BGP router connected to external AS. Apply
the route either incoming or outgoing routes.
external: clears all external peers.
clear ip bgp external soft [in |
out]
clear ipv6 bgp external soft [in |
out]
clear ip bgp external {unicast |
multicast} soft [in | out]
11.1.10.5 Session Reset of Peer Group
To reset the session for all members of a peer group, use the following command.
clear bgp peer-group GROUP
To reset the session for all configured routers of
specified peer group.
GROUP: peer group name
clear ip bgp peer-group GROUP
clear ipv6 bgp peer-group
GROUP
See Section 11.1.10.1 when you configure the detail parameters.
To reset the sessions of BGP routers which are members of specified peer group and
initialize the details of route configurations, use the following command.
clear ip bgp peer-group GROUP
in [prefix-filter]
Resets the session for all members of specified peer
group.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does
inbound soft reconfiguration.
GROUP: peer group name
clear ip bgp peer-group GROUP
{unicast | multicast} in [prefix-
filter]
clear ip bgp peer-group GROUP
out
Resets the session for all members of specified peer
group.
GROUP: peer group name
out: clears outgoing advertised routes.
unicast | multicast: address family modifier
clear ip bgp peer-group GROUP
{unicast | multicast} out
clear ip bgp peer-group GROUP
soft [in | out]
Resets the route information only while the session is
possible for all members of specified peer group. Apply
the route either incoming or outgoing routes.
GROUP: peer group name
clear ip bgp peer-group GROUP
{unicast | multicast} soft [in |
out]
To Next Page
Loading...