Dasan V5808 - ONU Upgrade

User Manual UMN:CLI
V5808
807
14.4 ONU Upgrade
The provides the remote ONU (ONT) upgradeability. This feature allows the system
administrators not to offer the local service for a single ONU (ONT) at the customer
premise. To upgrade an ONU successfully, you need to download a new ONU firmware in
the system.
14.4.1 Manual Upgrade
To upgrade the ONU, perform the following step-by-step instruction:
Step 1 Download ONU firmware using the following command.
Command
Mode
Description
copy {ftp | tftp} onu download
Enable
Downloads ONU firmware via FTP or TFTP.
ONU firmware can be downloaded by the above command. You can recognize ONU
firmware by the show onu firmware-list command.
Step 2 Verify the downloaded ONU firmware in the system using the following command.
Command
Mode
Description
show onu firmware-list
Enable
Global
GPON
GPON-OLT
Shows the ONU firmware list in the system.
Step 3 Upgrade an ONU with the downloaded firmware using the following command.
Command
Mode
Description
onu upgrade ONU-ID FILENAME
{ftp A.B.C.D USER PASSWD | tftp
A.B.C.D}
GPON-OLT
Upgrades an ONU (ONT) with a specified firmware.
ONU-ID: ONU ID (1-128) or ONU serial number
FILENAME: firmware file name
A.B.C.D: FTP/TFTP server IP address
USER: FTP server user name
PASSWD: FTP server password
After finishing the ONU upgrade, the ONU will restart automatically!
Step 4 Activate the upgraded ONT firmware’s version using the following command.
Command
Mode
Description
onu firmware active-change {all |
ONU-IDs}
GPON-OLT
Activate an firmware version of specified ONU or all
ONTs.
ONU-ID: 1-128
i
!