Dasan V5808 - Uplink MAC Learning; IGMP Configuration

User Manual UMN:CLI
V5808
703
To set the threshold of ONU memory in use, use the following command.
Command
Mode
Description
memory-usage threshold <0-
100>
ONU-Profile
Sets the threshold of ONU memory in the unit of
percent (%).
0-100: ONU memory in use
no memory-usage threshold
Deletes the configured threshold of ONU memory.
12.3.2.6 Uplink MAC learning
To enable/disable the MAC learning of ONT’s internal switch, use the following command.
Command
Mode
Description
switch-control uplink-mac-
learning enable
ONU-Profile
Enables the MAC learning of ONU’s uplink port
switch-control uplink-mac-
learning disable
Disables the MAC learning of ONU’s uplink port
This feature is available for the H645B, H645, H645A only.
To display the uplink MAC learning status of ONU, use the following command.
Command
Mode
Description
show onu switch-control OLT-ID
ONU-ID
Enable
Global
GPON
Shows the uplink MAC learning status of ONU’s uplink
port.
show onu switch-control ONU-
ID
GPON-OLT
12.3.2.7 IGMP Configuration
To specify the maximum number of IGMP groups, use the following command.
Command
Mode
Description
igmp max-groups <0-255>
ONU-Profile
Specifies the maximum number of IGMP groups.
0-255: maximum number of IGMP groups
no igmp max-groups
Deletes the specified maximum number of IGMP
groups.
i