Dasan V5808 - MAC Table; System Running Time; System Information

User Manual UMN:CLI
V5808
131
6.3.5 MAC Table
To display MAC table recorded in specific port, use the following command.
Command
Mode
Description
show mac [BRIDGE]
Enable
Global
Bridge
Shows MAC table.
BRIDGE: bridge name
show mac BRIDGE PORTS
The following is an example of displaying a current MAC table.
SWITCH(config)# show mac
========================================================================
vid port mac addr permission status in use
========================================================================
100 6 00:d0:cb:00:17:05 OK dynamic 0.42
101 7 00:00:66:02:01:02 OK dynamic 19.39
101 8 00:00:65:01:02:01 OK dynamic 115.65
SWITCH(config)#
6.3.6 System Running Time
To display the system running time, use the following command.
Command
Mode
Description
show uptime
Enable
Global
Bridge
Shows the system running time.
The following is an example of displaying the system running time.
SWITCH# show uptime
10:41am up 15 days, 10:55, 0 users, load average: 0.05, 0.07, 0.01
SWITCH#
6.3.7 System Information
To display the system information, use the following command.
Command
Mode
Description
show system
Enable
Global
Bridge
Shows the system information.