Dasan V5808 - Software Watchdog Configuration

User Manual UMN:CLI
V5808
121
6.1.15 Software Watchdog Configuration
The watchdog is responsible for bootstrapping V5808 and starting the necessary set of
server processes. You can configure the software watchdog to take an action for
controlling the system of V5808.
To enable/disable the watchdog function, use the following command.
Command
Mode
Description
watchdog {enable | disable}
Global
Enable/disables the watchdog function.
To configure the software watchdog function, use the following command.
Command
Mode
Description
watchdog trigger-mode {top-
half | timer | thread}
Global
Configures the watchdog trigger-mode.
watchdog timeout <15-120>
15-120: time (seconds)
To display the watchdog information, use the following command.
Command
Mode
Description
show watchdog
Enable
Global
Bridge
Shows the configured watchdog function.
To know at what time the V5808 watchdog is restarted, use the show boot-info
command.
i