Dasan V5808 - Displaying LACP Configuration

UMN:CLI User Manual
V5808
286
member port, select the member port number.
8.2.2.9 Displaying LACP Configuration
To display a configured LACP, use the following command.
Command
Mode
Description
show lacp
Enable
Global
Bridge
Shows the information of lacp configuration.
show lacp aggregator
Shows the information of aggregated port.
show lacp aggregator
AGGREGATIONS
Shows the information of selected aggregated port.
show lacp port
Shows the information of member port.
show lacp port PORTS
Shows the information of appropriated member port.
show lacp statistics
Shows aggregator statistics.
To clear LACP statistics information, use the following command.
Command
Mode
Description
clear lacp statistic
Enable
Global
Bridge
Clears the collected statistics.