Dasan V5808 - Ipv6 Configuration; Voip Service Link

UMN:CLI User Manual
V5808
728
12.4.5.5 IPv6 Configuration
To configure the IPv6 DHCP client mode, use the following command.
Command
Mode
Description
ipv6 dhcp client na
Traffic-
IP-host
Sets the DHCPv6 client mode using non-temporary
address.
ipv6 dhcp client stateless
Sets the DHCPv6 client mode using the stateless
address.
To control transmission of IPv6 Router Solicitation(RS) messages on the host, use the
following command.
Command
Mode
Description
ipv6 suppress-rs
Traffic-
IP-host
Disables the sending of RS messages on the IP host.
no ipv6 suppress-rs
Sends RS messages on the IP host.
12.4.5.6 Extended VLAN Tagging Operation Profile Association
To associate the extended VLAN tagging operation profile to the host, use the following
command.
Command
Mode
Description
extended-vlan-tagging-
operation NAME
Traffic-
IP-host
Associates the extended VLAN tagging operation
profile.
NAME: profile name
no extended-vlan-tagging-
operation
Disassociates the extended VLAN tagging operation
profile.
For the details of how to create and configure the extended VLAN tagging operation
profile, see 12.6 Extended VLAN Tagging Operation Profile.
12.4.5.7 VoIP Service Link
To link the VoIP service to the host, use the following command.
Command
Mode
Description
link voip-service SERVICE_ID
Traffic-
IP-host
Links the VoIP service to the host.
SERVICE_ID: VoIP service ID (1 to 32)
no link voip-service
SERVICE_ID
Disconnects the linked VoIP service.
For the details of how to create and configure the VoIP service, see 12.4.6 VoIP Service
Configuration (POTS UNI).
i
i