Dasan V5808 - Listing MAC Filter Policy; Displaying MAC Filter Policy

UMN:CLI User Manual
V5808
220
To delete MAC filtering policy, use the following command.
Command
Mode
Description
mac-filter del SRC-MAC-ADDR
[<1-4094>]
Bridge
Deletes filtering policy for specified MAC address.
To delete MAC filtering function, use the following command.
Command
Mode
Description
no mac-filter
Bridge
Deletes all MAC filtering functions.
7.14.3 Listing MAC Filter Policy
If you need to make many MAC filtering policies at a time, it is hard to input command
one by one. In this case, it is more convenient to save MAC filtering policies at
“/etc/mfdb.conf” and display the list of MAC filtering policy. To view the list of MAC filtering
policy at /etc/mfdb.conf, use the following command.
Command
Mode
Description
mac-filter list
Bridge
Shows the list of MAC filtering policy at /etc/mfdb.conf.
7.14.4 Displaying MAC Filter Policy
To show a configuration about MAC filter policy, use the following command.
Command
Mode
Description
show mac-filter
Enable
Global
Bridge
Shows a configured MAC filter policy.
show mac-filter default-policy
Shows the default MAC filter policy.