Dasan V5808 - OLT Traffic Statistics

UMN:CLI User Manual
V5808
644
The Received Signal Strength Indication (RSSI) is a measurement of the power present
in a received radio signal. The RSSI functionality in a newly released GPON OLT
transceiver helps the operators monitor the received optical signal strength from each
ONU (ONT).
To display the received signal power information from an ONU, use the following
command.
Command
Mode
Description
show olt rx-power OLT-ID [ONU-
ID]
Enable
Global
GPON
Shows OLT Rx signal power from an ONU.
show olt rx-power [ONU-ID]
GPON-OLT
Shows OLT Rx signal power from an ONU.
The following is an example of displaying the OLT RX power information of ONU ID 3.
SWITCH(config-gpon-olt[1])# show olt rx-power 3
----------------------------
ONU | Rx Power
----------------------------
3 | -16.0033 dBm
SWITCH(config-gpon-olt[1])#
12.1.22.1 OLT Traffic Statistics
To display traffic statistics of an OLT, use the following command.
Command
Mode
Description
show olt statistics OLT-ID
Enable/Global/GPON
Shows traffic statistics of an OLT.
show olt statistics
GPON-OLT
show olt statistics onu OLT-ID
ONU-ID
Enable/Global/GPON
Shows traffic statistics of a specified ONU
(ONT) collected by an OLT.
show olt statistics onu ONU-
IDs
GPON-OLT
show olt statistics activation
OLT-ID
Enable/Global/GPON
Shows traffic statistics of GPON activation
data.
show olt statistics activation
GPON-OLT
show olt statistics alarm OLT-
ID [ONU-IDs]
Enable/Global/GPON
Shows the ONU alarm counter data.
ONU-ID: ONU ID (1-128) or ONU serial
number
show olt statistics alarm
[ONU-IDs]
GPON-OLT
The following is an example of displaying traffic statistics of the OLT 1.
SWITCH(config-gpon-olt[1])# show olt statistics
------------------------------------------------------------------------------