Dasan V5808 - Mac Table

User Manual UMN:CLI
V5808
217
particular interface to the default value of unlimited
hosts.
To display the configured maximum number of hosts for interfaces, use the following
command.
Command
Mode
Description
show max-hosts
Bridge/
Global
Shows the configured maximum number of hosts for
the interfaces.
7.13 MAC Table
A dynamic MAC address is automatically registered in the MAC table, and it is removed if
there is no access to/from the network element corresponding to the MAC address during
the specified MAC aging time. On the other hand, a static MAC address is manually
registered by user. This will not be removed regardless of the MAC aging time before
removing it manually.
To manage a MAC table in the system, use the following command.
Command
Mode
Description
mac NAME PORT MAC-ADDR
Bridge
Specifies a static MAC address in the MAC table.
NAME: bridge name
PORT: port number
MAC-ADDR: MAC address
mac aging-time <10-21474830>
Specifies MAC aging time:
10-21474830: aging time (default: 300 seconds)
mac move {enable | disable}
PORTS
Sets the policy of handling a MAC address if a MAC
address already learned on one port has moved to a
different port.
enable: MAC address is recorded/learned for the most
recent arrival port and the previous entry is deleted
disable: MAC address is not recorded/learned for the
most recent arrival port and the previous entry is not
deleted.
To remove the registered dynamic MAC addresses from the MAC table, use the following
command.
Command
Mode
Description
clear mac [NAME]
Enable
Global
Bridge
Clears dynamic MAC addresses.
NAME: bridge name
clear mac NAME PORT
Clears dynamic MAC addresses.
PORT: port number
clear mac NAME PORT
MACADDR
Clears dynamic MAC addresses.
MACADDR: MAC address