UMN:CLI User Manual
V5808
198
Includes an admin class in a specified policy.
NAME:admin-class name
One admin policy cannot include both flow and class at the same time. Either admin flow
or admin class can belong to one policy.
To remove flow or class from the policy, use the following command.
Removes the admin flow from this policy.
Removes the admin class from this policy.
7.5.7.2 Admin Policy Priority
If rules that are more than two match the same packet then the rule having a higher
priority will be processed first.
To set a priority for an admin access rule, use the following command.
priority {highest | high | medium|
low}
Sets a priority for an admin policy.
(default: low)
7.5.7.3 Admin Policy Action
To specify the rule action (action match) for the packets matching configured classifying
patterns, use the following command.
To delete a specified rule action(action match), use the following command.
Deletes a specified rule action.
To specify a rule action (no-action match) for the packets not matching configured
classifying patterns, use the following command.
To Next Page
Loading...