Dasan V5808 - Voip Feature Access Codes; SIP User Data

User Manual UMN:CLI
V5808
763
12.7.2.4 VoIP Feature Access Codes
The configuration of VoIP feature access codes defines administrable feature access
codes for the VoIP subscriber.
To configure VoIP feature access codes, use the following command.
Command
Mode
Description
feature cancel-call-wait VALUE
VoIP-SIP
Specifies the access code for each feature.
VALUE: a string of characters from the set
(0..9, *, #) with trailing nulls in any unused
bytes
feature call-hold VALUE
feature call-park VALUE
feature caller-id-act VALUE
feature caller-id-deact VALUE
feature do-not-disturb-act VALUE
feature do-not-disturb-deact VALUE
feature do-not-disturb-pin-change VALUE
feature emerg-service-number VALUE
feature intercom-service VALUE
no feature cancel-call-wait
Deletes the specified access code for each
feature.
no feature call-hold
no feature call-park
no feature caller-id-act
no feature caller-id-deact
no feature do-not-disturb-act
no feature do-not-disturb-deact
no feature do-not-disturb-pin-change
no feature emerg-service-number
no feature intercom-service
12.7.2.5 SIP User Data
The configuration of SIP user data defines the user-specific attributes associated with a
specific VoIP CTP.
To specify an SIP voicemail server, use the following command.
Command
Mode
Description
voicemail-server-uri ADDRESS
VoIP-SIP
Configures IP address or URI of SIP voicemail server.
ADDRESS: voicemail server IP address or URI
To specify the voicemail subscription expiration time, use the following command.
Command
Mode
Description
voicemail-subscript-expire-time
VALUE
VoIP-SIP
Defines the voicemail subscription expiration time. If
this value is 0, the SIP agent uses an implementation-
specific value. (unit: second, default: 3600)