Dasan V5808 - Displaying ONU Traffic Statistics

UMN:CLI User Manual
V5808
782
12.10.5 Displaying ONU Traffic Statistics
To display the traffic statistics of an ONU applied by PM profile, use the following
command.
Command
Mode
Description
show onu statistics OLT-ID
[ONU-ID]
Enable
Global
GPON
Shows the information of ONU counters collected via
PM profile. (15 Min, Prev_15 Min, total)
show onu statistics [ONU-ID]
GPON-OLT
show onu statistics detail OLT-ID
Enable
Global
GPON
Shows the information of GEM port counters collected
via PM profile. (15 Min, Prev_15 Min, total)
show onu statistics detail [ONU-
ID]
GPON-OLT
show onu statistics {current |
current-detail} OLT-ID ONU-ID
Enable
Global
GPON
Shows the information of current ONU counters
collected via PM profile. (current counter, total + current
counter)
show onu statistics {current |
current-detail} ONU-ID
GPON-OLT
show onu statistics avg-pkt OLT-
ID ONU-ID [uni-eth-frame
UNI_ID]
Enable
Global
GPON
Shows the information of ONU counter (average
packets) collected via PM profile.
show onu statistics avg-pkt
ONU-ID [uni-eth-frame UNI_ID]
GPON-OLT
show onu statistics {pre_15 |
hour | day | total} OLT-ID ONU-ID
{eth PORT {us | ds} | pots PORT |
tdm PORT | pw NUMBER | gem
PORT | gem-nctp PORT | ani
PORT }
Enable
Global
GPON
Shows the information of ONU counters collected via
PM profile based on Ethernet, POTS, TDM, GEM, ANI
port or pseudowire number.
pre_15/hour/day/total: time duration (previous 15min /
hour / day / total)
us/ds: upstream/downstream
PORT: port number
NUMBER: pseudowire number
show onu statistics {pre_15 |
hour | day | total} ONU-ID {eth
PORT {us | ds} | pots PORT | tdm
PORT | pw NUMBER | gem PORT
gem-nctp PORT | ani PORT }
GPON-OLT
To clear the collected traffic statistics, use the following command.
Command
Mode
Description
clear onu statistics
GPON
Clears collected traffic statistics of an ONU.
clear onu statistics OLT-ID
[ONU-ID]
clear onu statistics [ONU-ID]
GPON-OLT
Clears collected traffic statistics of an ONU.