Dasan V5808 - Configuring Shared VLAN with FID

UMN:CLI User Manual
V5808
278
SWITCH(bridge)# show vlan dot1q-tunnel
Tag Protocol Id : 0x8100 (d: double-tagging port)
----------------------------------------------------
| 1 2 3 4
Port |123456789012345678901234567890123456789012
----------------------------------------------------
dtag ..........d...............................
SWITCH(bridge)#
Sample Configuration 5: Configuring Shared VLAN with FID
Configure br2, br3, br4 in the V5808 configured Layer 2 environment and port 24 as
Uplink port is configured. To transmit untagged packet through Uplink port rightly, follow
below configuration.
SWITCH(bridge)# vlan create br2
SWITCH(bridge)# vlan create br3
SWITCH(bridge)# vlan create br4
SWITCH(bridge)# vlan del default 3-8
SWITCH(bridge)# vlan add br2 3,4 untagged
SWITCH(bridge)# vlan add br3 5,6 untagged
SWITCH(bridge)# vlan add br4 7,8 untagged
SWITCH(bridge)# vlan add br2 24 untagged
SWITCH(bridge)# vlan add br3 24 untagged
SWITCH(bridge)# vlan add br4 24 untagged
SWITCH(bridge)# vlan create br5
SWITCH(bridge)# vlan add br5 1-42 untagged
SWITCH(bridge)# vlan fid 1-5 5
SWITCH(bridge)# show vlan
u: untagged port, t: tagged port
-----------------------------------------------------------------
| 1 2 3 4
Name( VID| FID) |123456789012345678901234567890123456789012
-----------------------------------------------------------------