Dasan V5808 - GPON Configuration Mode; GPON-OLT Configuration Mode; ONU Profile Configuration Mode; Main Command of GPON-OLT Configuration Mode

User Manual UMN:CLI
V5808
47
match
Classifies routing information to permit or deny.
set
Configures routing information options.
Tab. 3.12 Main Command of Route-map Configuration Mode
3.1.14 GPON Configuration Mode
In PON Configuration mode, you can configure GPON-related functions. To open GPON
Configuration mode, enter the gpon command, then the system prompt will be changed
from SWITCH(config)# to SWITCH(gpon)#.
Command
Mode
Description
gpon
Global
Opens GPON Configuration mode.
3.1.14.1 GPON-OLT Configuration Mode
In GPON-OLT Configuration mode, you can configure general functions a GPON OLT
interface such as an alarm, encryption, bandwidth, ONT registration, etc.
To open GPON-OLT Configuration mode, enter the gpon-olt command, then the system
prompt will be changed from SWITCH(gpon)# to SWITCH(config-gpon-olt[N])#.
Command
Mode
Description
gpon-olt OLT-ID
GPON
GPON-OLT
Opens GPON-OLT Configuration mode.
Tab. 3.13 shows main commands of GPON-OLT Configuration mode.
Command
Description
discover-serial-number
Configures an ONU (ONT) registration using ONT’s serial number.
olt
Configures an OLT-related function.
onu add
Registers an ONU (ONT).
onu upgrade
Upgrades an ONU firmware.
Tab. 3.13 Main Command of GPON-OLT Configuration Mode
3.1.14.2 ONU Profile Configuration Mode
In ONU Profile Configuration mode, you can configure an ONU profile.
To open ONU Profile Configuration mode, enter the onu-profile command, then the
system prompt will be changed from SWITCH(gpon)# to SWITCH(config-onu-
profile[NAME])#.
Command
Mode
Description
onu-profile NAME create
GPON
Opens ONU Profile Configuration mode.
Tab. 3.14 shows main commands of ONU Profile Configuration mode.