Dasan V5808 - Displaying ONU Information

User Manual UMN:CLI
V5808
685
SWITCH(gpon)# show onu auto-upgrade firmware
---------------------------------------------------------------------------------
Model | Firmware Name | Version | Status
---------------------------------------------------------------------------------
H645 | G_ONU_DALLAS_22_0_8_33.bin | 22.1.8.33 | Download Complete
To display the status of ONU firmware, use the following command.
Command
Mode
Description
show onu firmware version OLT-
ID [ONU-IDs]
Enable
Global
GPON
Shows the status of ONU firmware.
OLT-ID: GPON port number
ONU-ID: ONU ID (1-128) or ONU serial number
show onu firmware version
[ONU-IDs]
GPON-OLT
Shows the status of ONU firmware.
ONU-ID: ONU ID (1-128) or ONU serial number
• Changing Active Firmware
If an ONU supports the dual OS, you can change the active firmware using the following
command. To change the active firmware, use the following command.
Command
Mode
Description
onu firmware active-change
ONU-ID
GPON-OLT
Changes the active OS of ONU (with ONU reboot).
ONU-ID: ONU ID (1 to 128) or ONU serial number
12.2.25 Displaying ONU Information
To display the ONU (ONT) information, use the following command.
Command
Mode
Description
show onu info [OLT-IDs]
Enable
Global
GPON
Shows the information of ONU (ONT) per OLT ID.
OLT-IDs: GPON port number
show onu detail-info [OLT-ID]
Shows the ONU (ONT) information in detail.
OLT-ID: GPON OLT port number
ONU-ID: ONU ID (1 to 128) or ONU serial number
show onu detail-info [ONU-ID]
GPON-OLT
show onu info [ONU-ID]
Shows the ONU (ONT) information.
show onu feature-list [OLT-ID]
Enable
Global
GPON
Shows the ONU feature list.
show onu feature-list [ONU-ID]
GPON-OLT
show onu alarm-status [ONU-ID]
Shows the alarm status of ONUs.
To display the registered ONU (ONT) information, use the following command.
Command
Mode
Description
show onu active [OLT-ID]
Enable
Global
Shows the registered ONU (ONT) information.
OLT-ID: GPON port number