Dasan V5808 - Page 686

UMN:CLI User Manual
V5808
686
show onu active count [OLT-ID]
GPON
Shows the number of active ONUs connected to a
specified GPON port.
show onu active [ONU-ID]
GPON-OLT
Shows the registered ONU (ONT) information.
ONU-ID: ONU ID (1 to 128) or ONU serial number
show onu active count
Shows the number of active ONUs.
To display the link status of ONUs, use the following command.
Command
Mode
Description
show onu block status OLT-ID
[ONU-ID]
Enable/Global/GPON
Shows the link status of ONUs
OLT-ID: GPON port number
ONU-ID: ONU ID (1 to 128) or ONU serial
number
show onu block status [ONU-
ID]
GPON-OLT
To display a reason of ONU deactivation, use the following command.
Command
Mode
Description
show onu deactive-reason OLT-
ID
Enable/Global/GPON
Shows the reason of inactive ONUs.
show onu deactive-reason
GPON-OLT
To display the model names of the ONUs connected to a specified OLT, use the following
command.
Command
Mode
Description
show onu model-name OLT-ID
Enable/Global/GPON
Shows the model names of the ONUs.
ONU-ID: ONU ID (1 to 128) or ONU serial
number
show onu model-name [ONU-
ID]
GPON-OLT
To display the number of MAC addresses currently learned in an ONU, use the following
command.
Command
Mode
Description
show onu mac-address OLT-
ID
Enable/Global/GPON
Shows the number of MAC addresses currently
learned in ONUs connected to a current OLT.
show onu mac-address [ONU-
ID]
GPON-OLT
To display a host name of the specified ONU, use the following command.
Command
Mode
Description
show onu hostname OLT-ID
Enable
Global
GPON
Shows a host name of the specified ONU.
show onu hostname [ONU-IDs]
GPON-OLT