UMN:CLI User Manual
V5808
36
2 System Overview
V5808 can be used as a GPON Optical Line Termination (OLT) supporting 8-Port GPON
interfaces as well as L3 switch of supporting 4-Port 1/10GBase-R (SFP+) 10 Gigabit
Ethernet and 4-Port 10/100/1000Base-T(RJ45) Gigabit Ethernet service. It terminates the
traffic coming from the subscriber lines and consolidates it on one or more Gigabit
Ethernet interfaces towards the metropolitan area.
The GPON technology adds new features and functionality targeted at improving
performance and interoperability, and adds support for new applications, services, and
deployment scenarios. Among these changes are improvements in data rate and reach
performance, diagnostics, and stand-by mode, to name a few.
The V5808 introduces a point-to-multipoint concept with the GPON technology, which
enables a cost-effective FTTx service. The reason why GPON is considered as a cost-
effective solution is its usage of a passive splitter rather than an active switching system.
The V5808 has two Power Supply Unit (PSU) mounting slots on the front panel. Each
PSU is comprised of single power input. For power redundancy, user can equip dual
PSUs into 2-slot.
Fig. 2.1 shows the product view of the V5808.
Fig. 2.1 Front View of the V5808
To Next Page
Loading...