User Manual UMN:CLI
V5808
529
following command.
clear bgp * in [prefix-filter]
Resets the session of specific group under * condition.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does
inbound soft reconfiguration.
*: the conditional option (peer group name or AS
number or IP address)
WORD: view name
clear bgp * in [prefix-filter]
clear ipv6 bgp * in [prefix-filter]
clear ip bgp * {unicast |
multicast} in [prefix-filter]
Resets the session of specific group under * condition.
*: the conditional option (peer group name or AS
number or IP address)
out: clears outgoing advertised routes.
unicast | multicast: address family modifier
WORD: view name
clear bgp view WORD * out
clear ip bgp * {unicast |
multicast} out
clear bgp * soft [in | out]
Updates the route information only while the session is
possible for specific group under * condition. Apply the
route either incoming or outgoing routes.
*: the conditional option (peer group name or AS
number or IP address)
clear ip bgp * soft [in | out]
clear ipv6 bgp * soft [in | out]
clear ip bgp * {unicast |
multicast} soft [in | out]
11.1.10.2 Session Reset of Peers within Particular AS
To reset the session with all neighbor router which are connected to a particular AC, use
the following command.
Resets the session with all members of neighbor
routers which are configured a particular AC number.
clear ip bgp <1-4294967295>
clear ipv6 bgp <1-4294967295>
soft
See Section 11.1.10.1 when you configure the detail parameters.
To reset the sessions of BGP neighboring routers which are belong to specific AS number
and initialize the details of route configurations, use the following command.
clear bgp <1-4294967295> in
[prefix-filter]
Resets the session of BGP neighboring routers which
are configured a particular AC number.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does
clear ip bgp <1-4294967295> in
[prefix-filter]
To Next Page
Loading...