Dasan V5808 - Applying Multicast Access List; Displaying Multicast Access List

User Manual UMN:CLI
V5808
789
12.11.6.4 Applying Multicast Access List
To apply the configured multicast access list to a specified ONU ID, use the following
command.
Command
Mode
Description
onu multicast-access-list ONU-
ID NAME [multicast-profile
NAME]
GPON-OLT
Applies the dynamic/static multicast access control list
table to ONU ID. It discards the IGMP join message
from ONTs based on the access list.
ONU_ID: ONU ID or ONU serial number
NAME: multicast access list name
multicast-profile: applies the multicast ACL to the
specified ONUs on the Multicast profile.
NAME: multicast profile name
no onu multicast-access-list
ONU-ID NAME [multicast-profile
NAME]
Removes the specified multicast access list
configuration from ONU ID.
Up to 8 multicast access lists can be configured per ONU ID.
12.11.6.5 Displaying Multicast Access List
To display the information of multicast access list, use the following command.
Command
Mode
Description
show multicast-access-list
[NAME]
Enable
Global
GPON
GPON-OLT
Multicast-
ACL
Shows the information of multicast access lists.
NAME: Multicast access list name
To display the information of IGMP access control list per ONU, use the following
command.
Command
Mode
Description
show onu multicast-access-list
OLT-ID
Enable
Global
GPON
Shows the information of multicast access control lists
per ONU.
show onu multicast-access-list
[ONU-ID]
GPON-OLT
i