Dasan V5808 - Useful Tips; Listing Available Command

UMN:CLI User Manual
V5808
50
3.3 Useful Tips
This section describes useful tips for operating the V5808 with a CLI.
3.3.1 Listing Available Command
To list available commands, input question mark <?> in the current mode. When you input
the question mark <?>, you can see available commands used in this mode and variables
following after the commands.
The following is the available commands on Privileged EXEC Enable mode of the V5808.
SWITCH# ?
Exec commands:
clear Reset functions
clock Manually set the system clock
configure Enter configuration mode
copy Copy from one file to another
debug Debugging functions
default-os Select default OS
disconnect Disconnect user connection
enable Turn on privileged mode command
erase Erase saved configuration
exit End current mode and down to previous mode
halt Halt process
help Description of the interactive help system
no Negate a command or set its defaults
ping Send echo messages
quote Execute external command
release Release the acquired address of the interface
(Omitted)
SWITCH#
Question mark <?> will not be shown in the screen and you do not need to press
<ENTER> key to display the command list.
If you need to find out the list of available commands of the current mode in detail, use
the following commands.
Command
Mode
Description
show list
All
Shows available commands of the current mode.
show cli
Shows available commands of the current mode with
tree structure.
The following is an example of displaying the list of available commands of Privileged
EXEC Enable mode.
SWITCH# show list
clear arp
clear arp IFNAME
i