Dasan V5808 - Page 51

User Manual UMN:CLI
V5808
51
clear coredump PID
clear ip arp inspection log
clear ip arp inspection statistics (vlan VLAN_NAME|)
clear ip bgp *
clear ip bgp * in
clear ip bgp * in prefix-filter
clear ip bgp * (unicast|multicast) in
clear ip bgp * (unicast|multicast) in prefix-filter
clear ip bgp * (unicast|multicast) out
clear ip bgp * (unicast|multicast) soft
clear ip bgp * (unicast|multicast) soft in
clear ip bgp * (unicast|multicast) soft out
clear ip bgp * out
clear ip bgp * soft
clear ip bgp * soft in
clear ip bgp * soft out
clear ip bgp * vpnv4 unicast in
clear ip bgp * vpnv4 unicast out
clear ip bgp * vpnv4 unicast soft
clear ip bgp * vpnv4 unicast soft in
clear ip bgp * vpnv4 unicast soft out
clear ip bgp <1-65535>
clear ip bgp <1-65535> in
clear ip bgp <1-65535> in prefix-filter
clear ip bgp <1-65535> (unicast|multicast) in
-- more --
Press the <ENTER> key to skip to the next list.
In case that the V5808 installed command shell, you can find out commands starting with
a specific alphabet. Input the first letter and question mark without space. The following is
an example of finding out the commands starting “s” in Privileged EXEC Enable mode of
the V5808.
SWITCH# s?
show Show running system information
ssh Configure secure shell
SWITCH# s
In addition, it is possible to view variables you should input following commands. After
inputting the command you need, make one space and input a question mark. The
following is an example of viewing variables after the write command. Please note that
you must input one space between the command and question mark.
SWITCH# write ?
memory Write to NV memory
terminal Write to terminal
SWITCH# write
The V5808 also provides the simple instruction of calling the help string with the help
command. You can see the instruction using the command regardless of the configuration
i