Dasan V5808 - Voip Application Service

User Manual UMN:CLI
V5808
761
show onu voip sip-detail-oper
ONU-ID
GPON-OLT
12.7.2.3 VoIP Application Service
The configuration of VoIP application service defines the attributes of calling features
used in conjunction with a VoIP line service, such as CID, call waiting, call transfer, call
presentation, direct connect, and etc. To configure the CID features, use the following
command.
Command
Mode
Description
caller-id {call-number | call-
name | cid-blocking | cid-
number | cid-name | acr}
VoIP-SIP
Enables each feature for caller ID. (default: disabled)
call-number: calling number
call-name: calling name
cid-blocking: CID blocking (both number and name)
cid-number: permanent presentation status for number
cid-name: permanent presentation status for name
acr: anonymous CID blocking. It may not be possible to
support this feature in the ONT.
no caller-id
Disables all the features for caller ID.
To configure the call waiting features, use the following command.
Command
Mode
Description
call-waiting {call-wait | cid-
announce}
VoIP-SIP
Enables each feature for call waiting. (default:
disabled)
call-wait: call waiting
cid-announce: caller ID announcement
no call-waiting
Disables the call waiting feature.
To configure the call processing (transfer) features, use the following command.
Command
Mode
Description
call-progress-transfer {3way |
call-transfer | call-hold | call-
park | not-disturb | flash-emerg-
call | emerg-originating-hold |
6way}
VoIP-SIP
Enables each feature for call processing. (default:
disabled)
3way: 3way call
call-transfer: call transfer
call-hold: call hold
call-park: call park
not-disturb: do not disturb
flash-emerg-call: flash on emergency service call (flash
is to be processed during an emergency service call)
emerg-originating-hold: emergency service originating
hold (determines whether call clearing is to be
performed on on-hook during an emergency service
call)
6way: 6way call